Drink101

First Impressions: When we received The Chuggler from chuggler.com we kind of had an idea of what we were getting. It’s a cup with a hose attached to the bottom of it. The cup itself is made of extremely high quality plastic and feels really nice in your hand. The only foresaw one issue which is mentioned in the review below. The hose itself is a high quality rubber hose that you would find on any beer bong at any college around the country. The overall design is pretty good. The resevoir that holds the beer is not as large as it seems just from looking at it. Only the top half of the entire cup holds beer while the bottom half is more of a hollow plastic piece designed to make it so that the cup could rest easily on a table without the tube getting in the way. And even though the actual beer resevoir seems small compared to the actual size of the cup, we’re sure this thing can hold more than enough beer. Read more to see if it actually works!

Read More…

What You Need:

3+ Feet of Clear Rubber Tube (That will fit snug onto the funnel)
1 Good Size Funnel
1 Valve
Knife that will cut tube

What To Do:

This one is pretty common sense. If you’re here, you probably have already seen what a beer bong looks like. Read More…

What You Need:

1-2″ Of Tubing, Just wide enough to fit over the top of a beer bottle
1 Piece of tubing about the thickness of a straw, 7-8″ Long

What To Do:

This is simple to make, and I’m sure you’ve seen them advertised online in a million places. But why pay $10 for something you can make, for under $4. Read More…

First Impressions:

After hearing that we would be receiving a “Flabongo” to review we were pretty much expecting a pink flamingo yard decoration with the legs crudely hacked off and the beak sawed off and that is basically what we got, but it was definitely not as “crude” as we expected and it does what it”s supposed to, act as a beer bong. It”s not quite as large as the pink flamingos you would normally see sitting on some old ladies yard, but it still holds about 3 beers when completely full. We”re not sure if the flabongo is manufactured without the legs and beak, but from what we can tell it is not. Read More…

First Impressions:

We didn”t know what to expect when we were sent a sample of this product. The picture makes it out to be this nicely imprinted piece of PVC pipe. The video/text on the site gave me the impression that the product went over a beer bottle and almost clamped on to the top. Then had a button on the side for release of the beer so that you could turn the bottle over and then place it up to your mouth. Essentially what we got was $3 worth of PVC pipe with a sticker on it. I have to give them props for coming up with the idea, but its very very basic in design. Its basically a 6″ piece of PVC with couplings at the ends, one of them being a 90-degree bend, and then a small tube running through a hole at the very bottom, up out the top. The tube allows air to get into the bottom of the bottle when it is turned upside down. This allows the beer to drain faster through the tube and into your mouth. So based on first impressions of the actual product, we felt like morons for not coming up with this idea before. So we have to give these guys respect for coming up with the idea to sell these. To see how it actually performed, click on to read the review

Read More…