Drink101

How To Build A Ladder Golf Game aka Bolo Toss, Blongoball

What You Need (to make 2 ladders) 12 Golf Balls 6 Pieces of 1/8″ thick, 14″ long, Nylon Rope 14 - 2-ft Schedule 40 Pipes (smaller PVC pipe) 16 - 1-ft Schedule 40 Pipes (smaller PVC pipe) 12 PVC T’’s (that fit pipe above) 12 PVC “L”‘’s (that fit pipe above)

Continue reading...

How To Build A Horseshoe Pit

What You Need 36″x72″ Saw Large Hammer Screw Driver (preferably a battery operated drill with screw bit) Screws 4 Horseshoes 4 2×4′’s - 36″ Long 4 2×4′’s - 48″ Long Sand - Enough to fill 2 36″ x 72″ Boxes 2 24″ Stakes (solid metal pipes)

Continue reading...

How To Minimize Foam In A Fresh Beer Keg

What You Need: A Keg A Tap A Cup What To Do: Its pretty simple, but its a common mistake a lot of people make. DO NOT PUMP THE KEG BEFORE POURING THE FIRST BEER OF A NEW KEG!

Continue reading...

How To Make A Bags, Cornhole, Baggo Game Set

What You Need: (Note this is for tailgate size, regulation is 48″ Long platform, adjust accordingly) Power Drill/Screwdriver Jigsaw 2 Sheets of Plywood 24″ x 36″ 4 2×4′’s - 24″ Long (frame) 4 2×4′’s - 32″ Long (frame) 4 2×4′’s - 13.5″ Long (legs) Screws Drawing Compass Pencil 8 Bean Bags (4 of each color)

Continue reading...

How To Build A Basic Beer Bong w/ Valve

What You Need: 3+ Feet of Clear Rubber Tube (That will fit snug onto the funnel) 1 Good Size Funnel 1 Valve Knife that will cut tube What To Do: This one is pretty common sense. If you’re here, you probably have already seen what a beer bong looks like.

Continue reading...

How To Make A Beer Bottle Bong

What You Need: 1-2″ Of Tubing, Just wide enough to fit over the top of a beer bottle 1 Piece of tubing about the thickness of a straw, 7-8″ Long What To Do: This is simple to make, and I’m sure you’ve seen them advertised online in a million places. But why pay $10 for something you can make, [...]

Continue reading...

How To Build A Washer Box Game (Version 1)

What You Need: INSTRUCTIONS FOR 1 BOX, GAME REQUIRES 2 Enough wood to cut 4 13.5″ long 2×4′’s (3/4″ thick) Mitre Box (To cut 45 degree angles) At Least 6 2″ Washers 2 3″ Long 3″ Wide PVC Pipes 13.5″x13.5″ Piece of Plywood Some Nails Some Glue or caulk Hammer

Continue reading...

How To Shotgun a Beer

What You Need: 1 Can of Beer 1 Can Opener What You Do: 1. Hold the beer horizontal. If you dont do this, the next step is going to make a mess. 2. Take the can opener and make a hole on the side of the can, near the bottom. This is where your mouth will go.

Continue reading...

How To Do A Kegstand

What You Need: Yourself A Keg 2 People that can hold your weight (Or a wall near the keg you can put your legs on 1 Person to hold the Tap and pump What To Do: Its not really hard, but if you clicked on this one, you really don’t know what your doing.

Continue reading...

Chaser Hangover Pills Review

Review: Skeptical, I picked up a bottle of these pills. They come in bottles and personal fun packs for just 1 night of use. I opted for the bottle, just cause I figured I”d let other people take them if they wanted and see how they felt as well. On opening the bottle, I was greeted [...]

Continue reading...